Tannoy I7PREÇO SOB CONSULTA APENAS
- Disponibilidade: Em Stock
- Fabricante: Tannoy
- Código do produto: Tannoy I7
The Tannoy i7 is a tall and slim loudspeaker cabinet equipped with four 100mm (4.00``) low frequency direct radiating drive units and one 25mm (1.00``) titanium dome tweeter arranged as a line source.
Designed for use in acoustically difficult applications where controlled coverage is required, the dispersion characteristics of the i7 direct sound into the desired space while minimizing reflections from the ceiling. This makes it ideal for high quality music and speech reinforcement in highly reverberant environments ranging from houses of worship to retail environments and airports to conventions centres.
The coupling effects in the vertical plane result in a narrow and controlled 70° coverage pattern while the horizontal coverage is an extremely wide 110°. The complex frequency shading and integration techniques employed in the internal passive crossover network result in a smooth and uniform frequency response from 100Hz to 20kHz. A selector switch is located on the rear termination panel to allow the i7 to be installed as either a low impedance (8 Ohm) or 100V / 70.7V distributed line system. A rotary control adjusts the integral low insertion loss 60W transformer for 60, 30, 15, 7.5W operation.
- System type: Column Loudspeaker
- Recommended Amplified Power: Up to 180 Watt / 8 ohms
- Power Handling (2): (Average) 90 Watt, (Programme)180 Watt, (Peak) 360 Watt
- Sensitivity 2.83 Volts @ 1 metre (3): (Anechoic)89dB, (Half Space) 92dB
- Maximum SPL: (Average) 108dB, (Peak) 114dB
- Wattage Tap Selections: 60, 30, 15, 7.5 Watts
- Switchable Transformer Options: 70 Volt / 100 Volt or8 ohms
- Impedance: 8 ohms
- CrossoverFrequency: 1.8 kHz, 2.5 kHzType: PassiveDrive Unit
- Dispersion: 110° x 70° (H x V)
- Driver Complement: 4 x 100mm (4.00``) bass unit, 1 x 25mm (1.00``) titanium tweeter
- Enclosure: 7.88 litre MDF infinite baffle with perforated steel grille
- Finish: Textured charcoal or white - paintable to any colour to match the install décor
- Connectors: 2 x Speaker on NL4MP IN / OUT
- Fittings: 2 x M10 threaded inserts for i7Y & i7MAB brackets
- Mounting options: (i7 MAB) Multiple angle bracket,(i7Y) Yoke
- Dimensions: 572 x 135 x 175mm (22 1/2 x 5 3/8 x 63/4``) (145632-112) ... Bundled item (SN:i7) (145632-135)